No products in the cart.
65%
CRL 31M8060SN Brushed Satin Nickel Vernon 8060 Hydraulic ‘All-Glass’ Commercial Door Hinge
In Stock
In Stock
Description
- For Self-Closing Glass Doors from 3/8″ to 1/2″ (10 to 12 mm) Thick
- Recommended for Use on Interior Entry Doors to Bathroom/Shower Area (Not for Shower Doors)
- Aluminum Body in Your Choice of Several Finishes
- Hold Open or No Hold Open Models Available
- A Great Alternative to Floor Closers and Patch Fittings
- Use Monolithic Tempered Glass
Color
Satin Nickel
Application
Interior
Finish
Brushed Satin Nickel
This One Way Swinging Wall Mount Hinge Ideal for hermetic closing. Swings one way a full 90º, with stops at 0º and 90º. Closing speed can be adjusted. For doors up to 39″ (1 m) wide. Maximum weight per two hinges is 220 lbs. (100 kg).
The Vernon Hinge represents the evolution and the synthesis between automatic mechanical hinges and hydraulic door closers. Designed for use on interior doors (not for Shower Doors) leading into the bathroom area, Vernon allows you to design a self-closing door without the need of a floor-mounted or overhead closing device. This gives you the advantage of being able to install an ‘all-glass’ door in an existing opening without the need for extensive retrofitting of hardware into the floor or overhead.
Properly mounted, two Vernon Hinges will support a 3/8″ to 1/2″ (10 to 12 mm) thick glass door up to 39″ (1 m) in width and weighing up to 220 lbs. (100 kg). (Do not use more than two hinges.) A control valve lets you adjust the hinge to the desired closing speed. The Vernon Hinge has an internal stop on the valve adjustment screw stopping you from going too far, so you can open completely (4-5 turns) until you reach the speed required. The Vernon works properly between 5° to 104° degrees without problems. The viscosity of the oil could change, hence you may need to adjust the speed to compensate. And Vernon is ambidextrous, with positive stops at 0º and 90º, giving you even more design freedom.
The Vernon Hinge features an aluminum body in distinct configurations for Wall Mount and Glass-to-Glass applications. Vernon has been subject to strict testing (over 1 million cycles), assuring long lasting service.
SPECIFICATIONS:
Glass Thickness Range: 3/8″ to 1/2″ (10 to 12 mm)
Construction: Aluminum
Hinge Swings: 90º Inwards and Outwards (Except 31M8060 Model, Which Only Swings One Way)
Closing Type: Automatic Closing From 0 to 80º
Special Feature: Holds Open at 90º; Adjustable Closing Speed. No Hold Open Models Available (Except 31M8060 Model).
Cut-Out Required
Includes: Snap-In Molded Gaskets for 3/8″ (10 mm) and 1/2″ (12 mm) Glass; Hex Screws Maximum Capacities Using Two Hinges: Door Width: 39″ (1 m); Door Weight: 220 lbs. (100 kg) Important Notes: Do not use more than two hinges on one door. If hinges are to be used for other than their intended purpose, approval must be obtained from the DK Hardware Sales Department. Use only the template included with our hinge. Cut-out dimensions for CRL hinges may not match those of other brands.
The Vernon Hinge represents the evolution and the synthesis between automatic mechanical hinges and hydraulic door closers. Designed for use on interior doors (not for Shower Doors) leading into the bathroom area, Vernon allows you to design a self-closing door without the need of a floor-mounted or overhead closing device. This gives you the advantage of being able to install an ‘all-glass’ door in an existing opening without the need for extensive retrofitting of hardware into the floor or overhead.
Properly mounted, two Vernon Hinges will support a 3/8″ to 1/2″ (10 to 12 mm) thick glass door up to 39″ (1 m) in width and weighing up to 220 lbs. (100 kg). (Do not use more than two hinges.) A control valve lets you adjust the hinge to the desired closing speed. The Vernon Hinge has an internal stop on the valve adjustment screw stopping you from going too far, so you can open completely (4-5 turns) until you reach the speed required. The Vernon works properly between 5° to 104° degrees without problems. The viscosity of the oil could change, hence you may need to adjust the speed to compensate. And Vernon is ambidextrous, with positive stops at 0º and 90º, giving you even more design freedom.
The Vernon Hinge features an aluminum body in distinct configurations for Wall Mount and Glass-to-Glass applications. Vernon has been subject to strict testing (over 1 million cycles), assuring long lasting service.
SPECIFICATIONS:
Glass Thickness Range: 3/8″ to 1/2″ (10 to 12 mm)
Construction: Aluminum
Hinge Swings: 90º Inwards and Outwards (Except 31M8060 Model, Which Only Swings One Way)
Closing Type: Automatic Closing From 0 to 80º
Special Feature: Holds Open at 90º; Adjustable Closing Speed. No Hold Open Models Available (Except 31M8060 Model).
Cut-Out Required
Includes: Snap-In Molded Gaskets for 3/8″ (10 mm) and 1/2″ (12 mm) Glass; Hex Screws Maximum Capacities Using Two Hinges: Door Width: 39″ (1 m); Door Weight: 220 lbs. (100 kg) Important Notes: Do not use more than two hinges on one door. If hinges are to be used for other than their intended purpose, approval must be obtained from the DK Hardware Sales Department. Use only the template included with our hinge. Cut-out dimensions for CRL hinges may not match those of other brands.
Reviews
There are no reviews yet.